131
4.1.3 Check hour meter frequently
Check the reading displayed on hour meter to
see if the time has come for any necessary
maintenance. .
The interval listed on regular maintenance table
is made based on normal situation. If your
machine works under extreme condition, you
may shorten this interval to carry out
maintenance procedure.
4.1.4 Preparation work prior to maintenance
Park the machine at firm level ground.
Lower the bucket to the ground.
Shut down auto-idle function.
Allow engine to idle for 5 minutes.
Set the key to OFF position.
Set safety lock lever to LOCK position.
Post ‘DO NOT OPERATE” to the machine.
4.1.5 Handle fuel and lubricant properly.
【Important】
Always use recommended fuel and lubricant,
failure to do so will cause damages to
excavator, and your warranty right will
become void.
4.1.6 Check discharged grease and used filter.
With oil or filter core replaced, check used oil
and filter core for any metal chips and debris. If
a large amount of metal chips or debris is found,
report to the owner of the machine or your
superior, and take proper measures.
Exi
t
Upward
select
F5
F3
F4
Downward
select
Confirm
F1
Exit
Summary of Contents for SWE150F
