Sun Microsystems StorEdge L280, Manual

Page: 75 / 100

Chapter 4 Administration, Diagnostics, and Troubleshooting 4-11
CLOSE DRV HANDLE Closes the drive handle. Only one operation is performed,
regardless of the loop count chosen.
OPEN DRV HANDLE Use this test after performing the
REWIND MEDIA
test to manually
remove tapes. Opens the drive handle. Only one operation is
performed, regardless of the loop count chosen.
INIT MECHANICS
Performs the power-on self-tests. Each test is run one time per
test loop.
CHECK INVENTORY Functions the same as the SCSI Initialize Element Status
command. This test physically scans the entire unit to determine
which storage slots contain tape cartridges and if the drive
contains a cartridge.
Note: This test will be displayed as
ISTAT TEST
in all control
panel error messages.
EXERCISE MECH Runs the
TEST
,
TRANSLATE TEST
,
IO MAGAZINE
, and
IO
DRIVE
tests. Each test is run one time per test loop.
EMPTY TRANSPORT Moves the tape in the transport back to the original slot. The test
passes if the transport is empty.
TRANSPORT MOTOR Runs the cartridge motor in the transport back and forth.
PLUNGE TEST Runs the cartridge pusher back and forth.
TRANSLATE TEST Translates from side to side. No tape cartridge is required.
DOOR LOCK
Locks the door.
DOOR UNLOCK Unlocks the door.
DOOR SENSOR Displays if the door is open or not.
PUSH SENSOR 1 Displays the value of picker sensor 1.
PUSH SENSOR 2
Displays the value of picker sensor 2.
DOOR LOCK SENSOR Displays if the door is locked or not.
DRV HNDL OPEN
SENSOR Displays the current value of the drive handle open sensor.
DRV HNDLE CLOSE
SENSOR
Displays the current value of the drive handle close sensor.
T MAG SENSOR Displays the current value of the magazine side transport sensor.
T DRIVE SENSOR Displays the current value of the drive side transport sensor.
MAG PRESENT
SENSOR
Displays the current value of the magazine present sensor.
TABLE 4-4
Tests Available From the Control Panel (Continued)
Test Name Description