Sun Microsystems StorEdge L280, Manual

Page: 63 / 100

Chapter 3 Product Operation and Configuration 3-11
3.5.1 Password-Protected Functions
All
ADMIN *
functions are password protected.
1. Before accessing the following options, enter the password.
A default password of 000-000-000 is set at the factory. Change this password when
first using the Autoloader.
2. When a changeable menu selection is flashing, press Enter to select the option, or
press the
Prev
or
Next button
to display other available options.
3. Press Enter to select the flashing item.
Section 3.5.2, "Autoloader Display Menu Tree‚" on page 3-12 shows the autoloader
menu options available throughout the control panel.
To select the functions listed below the shaded boxes:
a. Press
Enter
when that option is displayed.
b. Press the Prev or Next button to scroll through the list.
c. To perform the displayed operation, press Enter .
TABLE 3-3
Admin Menu Options
Option Function
INFO *
Retrieves performance information stored in the
Autoloader.
CLEAN DRIVE *
Enables the user to clean the drive.
SCSI IDs *
Sets the SCSI addresses for the autoloader controller and
the drive.
CONFIG *
Customizes the Autoloader’s functions. See TABLE 4-2 on
page 4-7.
UPDATE DRIVE FW *
Enables the user to update the firmware in the drive.
TEST *
Runs internal autoloader tests (Section 4.8, “Running an
Internal Test,” on page 4-10).
OVERRIDE DOOR
Emergency door release that does not check the internal
state of the Autoloader.