Sun Microsystems StorEdge L280, Manual

Page: 68 / 100

4-4 StorEdge L280 Service Manual • February 1998
4.4 Setting or Viewing SCSI IDs
●
Press the Next button to enter the following:
Note –
Before setting SCSI IDs, check to see which IDs are available.
When you choose
SCSI IDs
, you have two options:
■
SET IDs *
assigns a SCSI ID to the drive and a SCSI ID to the autoloader
controller.
■
VIEW IDs *
displays the drive and autoloader controller settings.
TABLE 4-1
shows the default settings.
4.4.1 Setting SCSI IDs
To set SCSI IDs, press the Next button to enter the following:
1. When
SET IDs *
is displayed, press Enter .
■
AUTOLOADER ID #
,
DRIVE ID #
, or
UPDATE IDS NOW
is displayed.
■
AUTOLOADER ID #
stands for the current SCSI ID of the autoloader controller.
DRIVE ID #
is the current SCSI ID of the drive.
UPDATE IDS NOW
is used to save ID
settings.
2. Press
Next
until the setting to change is displayed, and then press
Enter
. The
current SCSI address flashes.
ADMIN * / PSWD ### ### ### / SCSI IDs *
TABLE 4-1
Default SCSI IDs
Device SCSI ID
Autoloader ID 1
Drive ID 0
ADMIN * / PSWD ### ### ### / SCSI IDs */ SET IDs *