Chapter 2
Configuring the System Console
23
▼
To Terminate a Session When Connected to the
System Controller Through the Serial Port
■
If you are at the Solaris console or the OpenBoot PROM go to LOM prompt by
typing the escape sequence, then terminate the LOM prompt session by typing
logout
and pressing Return:
■
If you are connected through a terminal server invoke the terminal server’s
command to disconnect the connection.
■
If the connection was established using a
tip
command then type the
tip
exit
sequence
~.
(tilde and a period):
▼
To Terminate a Session When Connected to the
System Controller Through a Network
Connection
1. If you are at the Solaris prompt or the OpenBoot PROM, go to the LOM prompt
by typing the escape sequence.
2. Terminate the LOM prompt session by using the
logout
command.
The remote session terminates automatically:
lom>logout
~.
lom>logout
Connection closed by foreign host.
%
Summary of Contents for Netra 1290
