Sun Microsystems Netra 1290, Administration Manual

Page: 34 / 146

16 Netra 1290 Server System Administration Guide • May 2006
■
ASCII terminal
■
Network terminal server
■
Workstation
See the Netra 1290 Server Installation Guide , 819-4372, for details of how to make the
physical connections. The procedure is different for each type of device.
▼ To Connect to an ASCII Terminal
If the LOM password has been set and the previous connection was logged out, you
are prompted for a password.
●
Enter the correct password as previously set up using the
password
command.
■
If the password is accepted, the SC indicates that a connection has been made.
■
If the server is in Standby mode, the
lom
prompt is automatically displayed.
■
If the server is not in standby mode, press Return and the Solaris console prompt
is displayed.
■
If a connection to the LOM console is already established over the network port,
then you can force the connection by logging out of the other connection:
Enter Password:
Connected.
lom>
Connected.
#