Sun Microsystems Netra 1290, Administration Manual

Page: 36 / 146

18 Netra 1290 Server System Administration Guide • May 2006
Accessing the LOM Console Through a Remote
Connection
▼
To Access the LOM Console Using a Remote Connection
In order to be able to access the LOM console through a remote connection (for
example: an SSH connection) to the 10/100BASE-T Ethernet port you must first set
up the interface.
Refer to the Netra 1290 Server Installation Guide , 819-4372.
1. Type the
ssh
command at the Solaris prompt to connect to the SC.
2. If the LOM password has been set up you are prompted for a password.
3. Enter the correct password as previously set up using the
password
command.
■
If the password is accepted the SC indicates that a connection has been made.
■
If the server is in Standby mode the
lom
prompt is automatically displayed.
■
If the server is not in standby mode, press Return and the Solaris console prompt
will be displayed.
■
If a connection to the LOM console is already established over the serial port, type
n
to cancel the forced logout.
% ssh
hostname
# Enter password:
Connected.
lom>
Connected.
#