Sun Microsystems Netra 1290, Administration Manual

Page: 28 / 146

10 Netra 1290 Server System Administration Guide • May 2006
Solaris Console
If the Solaris Operating System, the OpenBoot PROM, or POST is running, you can
access the Solaris console. When you connect to the Solaris console, you will be in
one of the following modes of operation:
■
Solaris Operating System console (
%
or
#
prompts).
■
OpenBoot PROM (
ok
prompt).
■
System is running POST and you can view the POST output.
To switch between these prompts and the LOM prompt, see “Switching Between the
Consoles” on page 20 .
Environmental Monitoring
Sensors monitor temperature, voltage, and fan operation.
TABLE 1-1
Selected System Controller Management Tasks
Tasks Commands
Configuring the system controller
password
,
setescape
,
seteventreporting
,
setupnetwork, setupsc
Configuring the server
setalarm, setlocator
Powering boards on or off, and powering the
server on or off
poweron
,
poweroff
,
reset
,
shutdown
Testing the CPU/memory board
testboard
Resetting the system controller
resetsc
Marking components as faulty or OK
disablecomponent
,
enablecomponent
Upgrading firmware
flashupdate
Displaying the current system controller settings
showescape
,
showeventreporting
,
shownetwork
,
showsc
Displaying the current system state
showalarm
,
showboards
,
showcomponent
,
showenvironment, showfault
,
showhostname
,
showlocator
,
showlogs
,
showmodel,
showresetstate
Setting the date, time, and time zone
setdate
Displaying the date and time
showdate