Sun Microsystems Netra 1290, Administration Manual

Page: 44 / 146

26 Netra 1290 Server System Administration Guide • May 2006
When used without options,
cfgadm
displays information about all known
attachment points, including board slots and SCSI buses. The following display
shows a typical output.
▼
To Display Detailed Board Status
● Use the command
cfgadm -av
for a more detailed status report.
The
-a
option lists attachment points and the
-v
option turns on expanded
(verbose) descriptions.
CODE EXAMPLE 2-2
is a partial display produced by the
cfgadm -av
command. The
output appears complicated because the lines wrap around in this display. This
status report is for the same server used in
CODE EXAMPLE 2-1
.
CODE EXAMPLE 2-1
Sample Output of the Basic
cfgadm
Command
# cfgadm
Ap_Id Type Receptacle Occupant Condition
N0.IB6 PCI+_I/O_Bo connected configured ok
N0.SB0 CPU_V3 disconnected unconfigured unknown
N0.SB2 CPU_V3 connected configured ok
N0.SB4 unknown empty unconfigured unknown
c0 scsi-bus connected configured unknown
c1 scsi-bus connected unconfigured unknown
c2 scsi-bus connected configured unknown
CODE EXAMPLE 2-2
Output of the
cfgadm -av
Command
# cfgadm -av
Ap_Id Receptacle Occupant Condition Information
When Type Busy Phys_Id
N0.IB6 connected configured ok powered-on, assigned
Feb 9 13:38 PCI+_I/O_Bo n /devices/ssm@0,0:N0.IB6
N0.IB6::pci0 connected configured ok device /ssm@0,0/pci@19,700000
Feb 9 13:38 io n /devices/ssm@0,0:N0.IB6::pci0
N0.IB6::pci1 connected configured ok device /ssm@0,0/pci@19,600000
Feb 9 13:38 io n /devices/ssm@0,0:N0.IB6::pci1
N0.IB6::pci2 connected configured ok device /ssm@0,0/pci@18,700000,
referenced
Feb 9 13:38 io n /devices/ssm@0,0:N0.IB6::pci2
N0.IB6::pci3 connected configured ok device /ssm@0,0/pci@18,600000
Feb 9 13:38 io n /devices/ssm@0,0:N0.IB6::pci3
N0.SB0 disconnected unconfigured unknown assigned
Feb 16 13:39 CPU_V3 y /devices/ssm@0,0:N0.SB0