Sun Microsystems Netra 1290, Administration Manual

Page: 53 / 146

Chapter 3 Lights Out Management 35
If you specify a level, you will see reports for that level and above. For example, if
you specify level 2, you will see reports of level 2 and level 1 events. If you specify
level 3, you will see reports of level 3, level 2, and level 1 events.
If you do not specify a level, you will see reports of level 3, level 2, and level 1
events.
CODE EXAMPLE 3-3
shows a sample event log display.
▼
To Check the Fans
● To check status of the fans, type:
For example:
CODE EXAMPLE 3-3
Sample LOM Event Log – Oldest Event Reported First
# lom -e 11
LOMlite Event Log:
Tue Feb 21 07:53:53 commando-sc lom: Boot: ScApp 5.20.0, RTOS 45
Tue Feb 21 07:54:02 commando-sc lom: Caching ID information
Tue Feb 21 07:54:03 commando-sc lom: Clock Source: 75MHz
Tue Feb 21 07:54:07 commando-sc lom: /N0/PS0: Status is OK
Tue Feb 21 07:54:08 commando-sc lom: /N0/PS1: Status is OK
Tue Feb 21 07:54:08 commando-sc lom: /N0/PS2: Status is OK
Tue Feb 21 07:54:09 commando-sc lom: /N0/PS3: Status is OK
Tue Feb 21 07:54:09 commando-sc lom: Chassis is in single
partition mode.
Tue Feb 21 07:55:12 commando-sc lom: Starting telnet server ...
Tue Feb 21 07:55:12 commando-sc lom: Starting telnet server ...
Tue Feb 21 08:00:02 commando-sc lom: Locator OFF
# lom -f
CODE EXAMPLE 3-4
Sample Output From the
lom -f
Command
# lom -f
Fans:
1 FT0/FAN0 ft_fan0 OK speed self-regulating
2 FT0/FAN1 ft_fan1 OK speed self-regulating
3 FT0/FAN2 ft_fan2 OK speed self-regulating
4 FT0/FAN3 ft_fan3 OK speed self-regulating
5 FT0/FAN4 ft_fan4 OK speed self-regulating
6 FT0/FAN5 ft_fan5 OK speed self-regulating
7 FT0/FAN6 ft_fan6 OK speed self-regulating