Chapter 5
Diagnostics
83
or because it failed POST.
Degraded
status indicates that certain components on
the boards have failed or are disabled, but there are still usable parts on the
board. Components with degraded status are configured into the server.
You can obtain additional information about
Failed
,
Disabled
, or
Degraded
components by reviewing the output from the
showcomponent
command.
■
The
showcomponent
command output after an autodiagnosis has occurred
The
Status
column in
CODE EXAMPLE 5-11
shows the status for components. The
status is either
enabled
or
disabled
. The disabled components are
unconfigured from the server. The POST status
chs
(abbreviation for component
health status) flags the component for further analysis by your service provider.
CODE EXAMPLE 5-10
showboards
Command Output –
Disabled
and
Degraded
Components
Slot Pwr Component Type State Status
---- --- -------------- ----- ------
SSC1 On System Controller V2 Main Passed
/N0/SCC - System Config Card Assigned OK
/N0/BP - Baseplane Assigned Passed
/N0/SIB - Indicator Board Assigned Passed
/N0/SPDB - System Power Distribution Bd. Assigned Passed
/N0/PS0 On A166 Power Supply - OK
/N0/PS1 On A166 Power Supply - OK
/N0/PS2 On A166 Power Supply - OK
/N0/PS3 On A166 Power Supply - OK
/N0/FT0 On Fan Tray Auto Speed Passed
/N0/RP0 On Repeater Board Assigned OK
/N0/RP2 On Repeater Board Assigned OK
/N0/SB0 On CPU Board Active Passed
/N0/SB2 On CPU Board V3 Assigned
Disabled
/N0/SB4 On CPU Board Active Degraded
/N0/IB6 On PCI+ I/O Board Active Passed
/N0/MB - Media Bay Assigned Passed
CODE EXAMPLE 5-11
showcomponent
Command Output – Disabled Components
lom> showcomponent
Component Status Pending POST Description
--------- ------ ------- ---- -----------
/N0/SB0/P0/C0
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P0/C1
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P1/C0
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P1/C1
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P2/C0
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P2/C1
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
/N0/SB0/P3/C0
disabled
-
pass
UltraSPARC-IV+, 1500MHz, 16M ECache
Summary of Contents for Netra 1290
