N
AME
: T
RAINING
D
EPARTMENT
D
ATE
: 2017
P
AGE
:
28 / 59
R
EFERENCE
: T
ECHNICIAN
’
S
O
PERATING
M
ANUAL
X40+-X50+ ISOBUS
I
ND
03
+
+
5
-
C
HUTE
ACTUATORS
(W
IDTH
)
D3.2
3- Diagnostics on the console :
From the
HOME
menu, make sure that the shutters are closed
Access the
ADVANCED SETTINGS
menu with
Select
"Diagnostique" (Diagnostics)
And press the
key
To check an actuator, perform a complete extension of the rod,
0 pulses
± 2 and a
130 mm
stroke should be obtained.
Then retract the rod completely to check
260 pulses
± 2 and a
0 mm
stroke.
If there is a fault, the screen displays
"Bloqué" (Jammed)
4- Checking the positioning of the actuators
The consistency between the chute lever mark and the indication on the screen can also be checked. Only check between marks
110 and 140. Tolerance is ± 1 graduation
If the actuator pulses are returned correctly, but there is an offset in the graduations, please perform a calibration.
(See Sheet B4)
Left actuator
extension control
Left actuator
retraction control
Right actuator
extension control
Right actuator
retraction control
Left-hand chute
actuator
Actuator status
OK/Moved
/Jammed
Right-hand chute
actuator
Actuator status
Ok/Moved
/Jammed
Actuator return:
Rod extension:
Lever mark:
