N
AME
: T
RAINING
D
EPARTMENT
D
ATE
: 2017
P
AGE
:
13 / 59
R
EFERENCE
: T
ECHNICIAN
’
S
O
PERATING
M
ANUAL
X40+-X50+ ISOBUS
I
ND
03
+
+
5
-
C
ALIBRATION
OF
THE
WEIGHING
DEVICE
C1
The weighing device allows a tolerance margin of 3%. If you notice a weight diff erence between the control unit information and the real
weight, you can calibrate the weighing device sensor. To calibrate the weighing device sensor follow the procedure below. In order to be
able to calibrate the sensor, load a known weight into the hopper. (The weight must be a minimum of 1000 kg).
The reference weight must be accurate in order to obtain a good result.
ᇗ
On the universal terminal, access the
ADVANCED SETTINGS
menu
Select
"Calibration pesée" (Weight calibration)
Enter the PIN code
1234
and confi rm.
ᇗ
Enter the actual weight
and select the corresponding fi eld
ᇗ
The software calculates the error percentage.
ᇗ
Confi rm the calibration with the key
Press
ESC
and return to the
HOME
page
The weighing device is calibrated
