Suitmate Swimsuit Water Extractor 115V, Installation & Maintenance

Page: 24 / 58

©2017 Extractor Corporation 115-V 20-Amp 60-Hz SUITMATE ® Unit
22
BOTTOM VIEW OF DRIVE UNIT
DRIVE UNIT ASSEMBLY (1) EC23
THIS SHOCK BUMPER RING IN POSITION.
SPACER. IT IS REQUIRED TO KEEP
NOTE LOCATION OF ALUMINUM
CASE ASSEMBLY (1) EC12
FRONT FACE OF UNIT
AND (3) LOCK WASHERS (AEC1238)
CONSISTING OF (3) NUTS (AEC1224)
DRIVE UNIT ASSEMBLY MOUNTING
DRIVE UNIT
REMOVAL OF
SHOCK MOUNT
SUITMATE ® UNIT
BOTTOM VIEW OF
L1
L2
Black Wire terminated with Insulated
Connector. Secured to this terminal (L1).
Green / Yellow Wire secured to Motor Frame
with Green (Hex Head) Screw
This switch must be in the 115 position.
Alternative: The black clip must be
installed with the white arrow
pointing to 115V.
(2) White Wires - one terminated with
Insulated Connector, second with
Flange Fork Connector to terminal (L2).*
Photograph shows the Correct Position of Wires for Rewiring the Motor
*On units without a Timer, there is (1) White Wire.