Suitmate Swimsuit Water Extractor 115V, Installation & Maintenance

Page: 6 / 58

©2017 Extractor Corporation 115-V 20-Amp 60-Hz SUITMATE ® Unit
4
To secure the Wall Mount Bracket, center the bracket at the desired location and mark the locations of the two
center holes. Secure the Wall Mount Bracket at the center holes using fasteners appropriate for your
conditions. All fasteners must be capable of supporting 55 pounds (25kg) in addition to the added weight or
pressure of people leaning on the unit. Make certain the Wall Mount Bracket is level. Next secure the outer
holes of the Wall Mount Bracket to the structure using fasteners appropriate to your conditions. After the
bracket has been properly anchored to the wall and the electrical and drainage requirements have been
allowed for, the SUITMATE
®
unit is ready to be mounted to the wall.
Mounting the SUITMATE
®
Unit to the Wall
Remove the SUITMATE
®
unit from its shipping box. Remove and discard the packaging material that is
protecting the SUITMATE ® unit, including the material protecting the SUITMATE ® motor. The upper back lip of
the SUITMATE
®
unit should be lowered down and centered on the Wall Mount Bracket. After the unit is cen-
tered, push down on the back of the unit to make certain that it is securely wedged onto the bracket. Make
certain the unit is level. If it is not level, remove the unit, adjust the Wall Mount Bracket and re-hang the unit. A
level installation is necessary to minimize vibration and insure proper drainage of wastewater. Finish securing
the unit to the wall using appropriate fasteners and anchors on the lower mounting channel at the bottom rear
of the unit. This will prevent the unit from being lifted from the bracket or being moved.
Note: Several holes in the lower mounting bracket may be obstructed by the GFCI Cover. Remove the GFCI
cover to provide access to these holes.
SUITMATE ® UNIT
(front)
WALL MOUNT
BRACKET
USE APPROPRIATE ANCHORS AND
FASTENERS TO MOUNT THE UNIT
FOR YOUR SPECIFIC INSTALLATION
CUTAWAY VIEW OF SUITMATE
®
UNIT
FLOOR
PRESS HERE TO FIRMLY
SET SUITMATE
®
UNIT
WALL
WALL
MOUNT
BRACKET
UPPER
BACK
LIP OF UNIT
EASE
UNIT
OVER
BRACKET
AND
LOWER
MOUNTING
SCREWS