©2017 Extractor Corporation
115-V 20-Amp 60-Hz SUITMATE
®
Unit
39
REMOVE AND REPLACE MOTOR
'
o t
K
i
V
),567
Make certain you have all the correct parts and fasteners necessary for correct installation. Re-use any parts
that are not damaged, otherwise replace them. Parts used in this process: (1) AEC1822 Aluminum Spacer,
(3) AEC1504 Motor Mount Spacers, (4) AEC1505 Hex Head Bolts, (4) AEC1203 Lock Washers, and (1)
BEC1502 Motor 115-V 60-Hz. Plus any components required to properly reinstall the Basket, Hub, and Brake
Disc Assembly (Page 27), the Drive Unit Assembly (Page 23), and the Sub-Top and Top Assemblies (Page 17).
REMOVE MOTOR FROM MOUNTING PLATE
1) Remove SUITMATE
®
unit from the Wall Mount Bracket. See instructions beginning on Page 14.
2) Remove Top and Sub-Top Assemblies. See instructions beginning on Page 15.
3) Remove Drive Unit Assembly. See instructions beginning on Page 23.
4) Remove Basket, Hub, and Brake Disc Assembly. See instructions beginning on Page 27.
5) Referring to photograph and drawings on Pages 38 through 40, remove the (4) Hex Head Bolts, Lock
Washers, and Motor Mount Spacers that hold the Motor to the Mounting Plate.
Note:
Examine the placement of the (4) spacers, especially the AEC
822 Aluminum Spacer next to the
Shock
%
umper Ring. The rectangular spacer prevents the Shock
%
umper Ring from moving. Examine the
location of the
0
otor for the
90
o
connector in relation to the three Shock
0
ounts.
6) Remove the Motor and set aside.
REPLACE MOTOR
1) Replace the motor using the (4) bolts and (4) lock washers, especially noting placement of the AEC1822
Aluminum Spacer next to the Shock Bumper Ring. See Bottom View of Drive Unit on Page 38 for
detail. In addition see the photograph and drawings on Pages 38 and 40.
Note:
:
hen reassembling, use silicone sealer on the bolts and lock washers to preserve water tightness.
2) Reinstall Basket, Hub, and Brake Disc Assembly. See instructions beginning on Page 27.
3) Reinstall Drive Unit Assembly. See instructions beginning on Page 23.
4) Reinstall Sub-Top and Top Assemblies. See instructions beginning on Page 17.
5) Reinstall the SUITMATE
®
unit to the Wall Mount Bracket. See instructions beginning on Page 14.
6) Retest the SUTIMATE
®
unit for proper operation. Refer to TESTING AND OPERATION on Page 7.
Summary of Contents for Swimsuit Water Extractor 115V
Page 1: ...115V 60Hz Manual Installation Maintenance...
Page 2: ......
Page 57: ......
Page 58: ...v052017...
