Subaru WRX 2018, Owner'S Manual

Page: 62 / 572

Seat, seatbelt and SRS airbags/Child restraint systems
Your vehicle is equipped with four lower
anchorages (bars) and three upper an-
chorages (tether anchorages) for accom-
modating such child restraint systems.
The lower anchorages (bars) are used for
installing a child restraint system only in
the rear seat window-side seating posi-
tions. For each window-side seating posi-
tion, two lower anchorages are provided.
Each lower anchorage is located behind
the cover of the seatback bottom.
The tether anchorages (upper an-
chorages) are provided at the locations
shown in the above illustration. For de-
tails, refer to
“
Top tether anchorages
” F
1-
32.
To install a child restraint system using
lower and tether anchorages, perform the
following procedure.
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Shake the seatback to confirm that it is
securely locked into place.
–
Check the red colored unlocking
marker which is attached to the bottom
of the lock release knob is not visible.
For details, refer to
“
Folding down the
rear seatback
” F
1-10.
2. You will find marks
“ ”
at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
1-30