Subaru WRX 2018, Owner'S Manual

Page: 143 / 572

NOTE
If the key cannot be turned, turn the
steering wheel slightly to the left and
right as you turn the ignition switch.
!
Switch positions
Position Description
LOCK
You can insert or remove the
key only in this position. The
steering wheel will be locked
with the key removed.
ACC
You can use the electrical
accessories (audio, acces-
sory power outlet, etc.).
ON
Normal operating position
after starting the engine
START
The engine is started in this
position.
CAUTION
Do not turn the ignition switch to the
“
START
”
position while the engine
is running.
NOTE
.
To turn the key from the
“
ACC
”
to
“
LOCK
”
position:
–
Place the select lever in the
“
P
”
position (CVT models).
–
Push in and turn the key.
.
If your registered key fails to start
the engine, perform the following pro-
cedure to restart the engine.
(1) Pull out the key once (the se-
curity indicator light will blink).
(2) Insert the key again.
(3) Return the ignition switch to the
“
START
”
position.
.
The engine may not start in the
following cases:
–
The key grip is touching another
key or a metallic key holder.
–
The key is near another key that
contains an immobilizer transpon-
Instruments and controls/Ignition switch
–
CONTINUED
–
3-5