Subaru WRX 2018, Owner'S Manual, Page: 407 / 572

will return to and maintain the previous
cruising speed.
NOTE
For CVT models, when you set the
desired speed while the Sport Sharp
(S#) mode is selected, the select lever/
gear position indicator will change
from the current gear position indica-
tion to the
“
D
”
indication.
&
To temporarily cancel the
cruise control
You can temporarily cancel the cruise
control in the following ways.
.
Press the
“
CANCEL
”
button.
.
Depress the brake pedal.
.
Depress the clutch pedal (MT models
only).
WARNING
For CVT models, you can cancel the
cruise control by shifting the select
lever into the
“
N
”
position. However,
do not shift the lever into the
“
N
”
position while driving except in case
of emergency. If the select lever is
shifted into the
“
N
”
position, the
engine brake will no longer work.
This could result in an accident.
The cruise control set indicator in the
combination meter disappears when the
cruise control is canceled.
To resume the cruise control after it has
been temporarily canceled and with vehi-
cle speed of approximately 20 mph (30
km/h) or more, press the
“
RES/SET
”
switch to the
“
RES
”
side to return to the
original cruising speed automatically.
The cruise control set indicator in the
combination meter will automatically ap-
pear at this time.
&
To turn off the cruise control
There are two ways to turn off the cruise
control:
.
Press the cruise control main button
again.
.
Turn the ignition switch to the
“
ACC
”
or
“
LOCK
”
/
“
OFF
”
position (but only when the
vehicle is completely stopped).
&
To change the cruising speed
!
To increase the speed (by the
“
RES/
SET
”
switch)
Starting and operating/Cruise control
–
CONTINUED
–
7-55