Subaru WRX 2018, Owner'S Manual, Page: 405 / 572

Hill start assist OFF indicator light
7. Within 2 seconds, press back the
Vehicle Dynamics Control OFF switch.
The Hill start assist OFF indicator light
turns on and off.
8. Turn the ignition switch to the
“
LOCK
”
/
“
OFF
”
position. The Hill start assist system
is deactivated.
NOTE
When the Hill start assist system is
deactivated, the Hill start assist OFF
indicator light illuminates continuously.
!
To reactivate
To reactivate the Hill start assist system,
repeat steps 1 to 8. When the Hill start
assist system is activated, the Hill start
assist OFF indicator light turns off.
&
Hill start assist warning light/
Hill start assist OFF indicator
light (models without the
electronic parking brake
system)
Refer to
“
Hill start assist warning light/Hill
start assist OFF indicator light (models
without electronic parking brake system)
”
F
3-24.
Cruise control
NOTE
For models with the EyeSight system:
Refer to the Owner
’
s Manual supple-
ment for the EyeSight system.
Cruise control enables you to maintain a
constant vehicle speed without holding
your foot on the accelerator pedal and it is
operative when the vehicle speed is 20
mph (30 km/h) or more.
WARNING
Do not use the cruise control under
any of the following conditions.
These may cause loss of vehicle
control.
.
driving up or down a steep grade
.
driving on slippery or winding
roads
.
driving in heavy traffic
NOTE
.
On uphill and downhill slopes, de-
pending on the degree of the slope and
the load of the vehicle, there may be
cases when a constant speed cannot
be guaranteed.
.
If the cruise control indicator does
Starting and operating/Cruise control
–
CONTINUED
–
7-53