Subaru WRX 2018, Owner'S Manual

Page: 57 / 572

&
Choosing a child restraint
system
Choose a child restraint system that is
appropriate for the child
’
s age and size
(weight and height) in order to provide the
child with proper protection. The child
restraint system should meet all applic-
able requirements of Federal Motor Vehi-
cle Safety Standards for the United States
or of Canada Motor Vehicle Safety Stan-
dards for Canada. It can be identified by
looking for the label on the child restraint
system or the manufacturer
’
s statement of
compliance in the document attached to
the system.
Also it is important for you to make sure
that the child restraint system is compa-
tible with the vehicle in which it will be
used.
&
Installing child restraint sys-
tems with ALR/ELR seatbelt
CAUTION
When you install a child restraint
system, follow the manufacturer
’
s
instructions supplied with it. After
installing the child restraint system,
check to ensure that it is held
securely in position. If it is not held
tight and secure, the danger of your
child suffering personal injury in the
event of an accident may be in-
creased.
!
Installing a rearward facing child
restraint
WARNING
Before installing a child restraint
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accident,
serious injury or death could result.
1. Shake the seatback to confirm that it is
securely locked into place.
–
Check the red colored unlocking
marker which is attached to the bottom
of the lock release knob is not visible.
For details, refer to
“
Folding down the
rear seatback
” F
1-10.
2. Place the child restraint system in the
rear seating position.
WARNING
When you intend to install a child
restraint system in the rear center
seating position, if the child restraint
system does not fit snugly against
the contours of the rear center seat
cushion, install the child restraint
system in the window-side seating
Seat, seatbelt and SRS airbags/Child restraint systems
–
CONTINUED
–
1-25