Subaru WRX 2018, Owner'S Manual

Page: 380 / 572

Starting and operating/SI
–
DRIVE
3. Remove the grip portion of the screw-
driver.
4. While depressing the brake pedal,
insert a screwdriver into the hole, press
the shift lock release button using a
screwdriver, and then move the select
lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection
as soon as possible.
&
Driving tips
NOTE
If the accelerator and brake pedals are
depressed at the same time, driving
torque may be restrained. This is not a
malfunction.
.
Always apply the foot or parking brake
when the vehicle is stopped in the
“
D
”
or
“
R
”
position.
.
Make sure to apply the parking brake
when parking your vehicle. Do not hold
the vehicle with only the mechanical
friction of the transmission.
.
Do not keep the vehicle in a stationary
position on an uphill grade by using the
“
D
”
position. Use the brake instead.
.
The engine may, on rare occasions,
knock when the vehicle rapidly acceler-
ates or rapidly pulls away from a standstill.
This phenomenon does not indicate a
malfunction.
SI-DRIVE (if equipped)
SI-DRIVE (SUBARU Intelligent Drive)
works to maximize engine performance,
control and efficiency.
This system consists of three modes:
.
Intelligent (I) mode
.
Sport (S) mode
.
Sport Sharp (S#) mode
By adjusting the SI-DRIVE selector, the
character of the power unit changes.
&
Intelligent (I) mode
!
For smooth, efficient performance
driving
The Intelligent (I) mode provides well-
balanced performance with greater fuel
7-28