Subaru WRX 2018, Owner'S Manual

Page: 110 / 572

Keys and doors/Keyless access with push
–
button start system
as
“
11122
”
or
“
12121
”
as a PIN code.
Doing so will increase the risk of
vehicle theft.
.
When you try to register
“
22222
”
,
the registered PIN code will be deleted.
You cannot unlock the doors by PIN
Code Access until a new code is
registered.
.
After registering a new PIN code,
make sure that you can unlock the
doors using the PIN code.
.
When you delete the PIN code while
the keyless access function is dis-
abled, the keyless access function will
be enabled.
.
Reregister the PIN code in the
following case.
–
when you forget the PIN code
–
when you want to change the PIN
code
!
Unlocking
Perform steps 1 to 5 described in
“
Regis-
tration
”
.
NOTE
.
You cannot unlock by PIN Code
Access in the following cases.
–
when the access key fob is within
the operating ranges
–
when the ignition switch is in the
“
ACC
”
or
“
ON
”
position
.
If you make an operation error
during the unlocking procedure, start
over with the unlocking procedure after
waiting for 5 seconds or longer.
.
To protect your vehicle from theft, a
buzzer will sound if incorrect PIN codes
are entered five times continuously. If
this occurs, you cannot unlock the
doors by PIN Code Access for 5
minutes.
&
Power saving function
The keyless access function will be
disabled in the following cases to protect
the battery of the access key fob and the
vehicle battery.
Case 1: When the keyless access func-
tion and the remote keyless entry system
have not been used for 2 weeks or longer
while all doors are locked
Case 2: When the access key fob has
been left in the operating range for 10
minutes or longer while all doors are
locked
!
Recovery from power saving mode
When one of the following is operated, the
keyless access function will be recovered.
Case 1:
.
Unlock the doors by operating any
procedure other than gripping the front
passenger
’
s door handle
.
Lock or unlock the doors
.
Open a door and then close it
Case 2:
.
Unlock the doors by gripping the door
handle
.
Lock the doors by touching the door
lock sensor
.
Lock or unlock the doors by using the
remote keyless entry system
.
Lock or unlock the doors by using the
power door locking switch
.
Open either of the front doors
2-14