Subaru WRX 2018, Owner'S Manual

Page: 352 / 572

Interior equipment/Front View Monitor
.
The camera unit is a waterproof
structure. Do not attempt to re-
move, disassemble or modify the
unit.
.
Do not rub strongly or polish the
camera lens with a hard brush or
abrasive compounds. The lens
may be scratched resulting in an
adverse effect to the camera
image.
.
The camera lens is made of glass
or plastic. Do not allow any
organic solvent, body wax, oil
film remover or glass coating
agent to become attached on
the lens surface. If any becomes
attached, remove it immediately.
.
Do not expose the camera lens to
any sudden temperature change,
for example, spraying hot water
on it in cold weather.
.
Do not apply the water jet of a
high pressure washer to the
camera or the surrounding area
when cleaning the vehicle. The
impact by the strong water pres-
sure may cause the camera to
come off. Also, water may enter
inside the camera and cause a
malfunction.
.
If the camera is exposed to any
impact, it may lead to malfunc-
tion of the camera. Have the
c a m e r a i n s pe c t e d by y ou r
SUBARU dealer as soon as pos-
sible.
.
Do not use a steam cleaner under
any circumstances. Some types
of steam cleaners inject hot
steam.
.
The camera surface may be da-
maged by a flying stone.
NOTE
If the camera lens is contaminated, no
sharp image is available. When the
camera is contaminated with water
drops, snow or mud, wash it with water
and wipe away any moisture with a soft
cloth. If it heavily gets dirty, wash it with
a neutral detergent.
6-22