Subaru WRX 2018, Owner'S Manual

Page: 263 / 572

&
AM/FM radio
!
Control screen and audio panel
No. Function
&
1
Select to display the audio source
selection screen.
&
2
Select to change the band.
&
3
The HD Radio indicator on the top
right of the screen changes accord-
ing to the reception condition of HD
Radio (if equipped).
&
4
Select to display a station list (if
equipped). Refer to
“
Selecting a
station from the list
” F
5-28.
No. Function
&
5
Select to scan radio channels.
This function enables searching for
receivable stations automatically,
and tunes in to a frequency for 5
seconds if a station is found. When
the 5-second period has elapsed, the
system searches for the next recei-
vable station again, and tunes in to
the frequency for 5 seconds.
&
6
Select to open the
“
Option
”
screen.
Refer to
“
Radio settings
” F
5-29.
&
7
When you touch a key, the system
tunes to the stored frequency.
When you touch and hold a key, the
system stores the frequency to the
selected preset channel. Refer to
“
Presetting a station
” F
5-28.
No. Function
&
8
Turn to adjust volume.
Press to turn the audio system on/
off.
&
9
Turn to step up/down frequencies.
Turn to move up/down the list. Also,
the knob can be used to enter
selections on the list screens by
pressing.
Press to select an audio mode. For
details, refer to
“
Selecting an audio
source
” F
5-17.
&
10
Press to display the sound setting
screen. Refer to
“
Unit settings
” F
5-
18.
&
11
Press to seek for a station/channel.
Press and hold for continuous seek.
NOTE
.
Although FM is normally static free,
reception can be affected by the sur-
rounding area, atmospheric conditions,
station strength and transmitter dis-
tance. Buildings or other obstructions
may cause momentary static, flutter or
station interference. If reception con-
tinues to be unsatisfactory, switch to a
stronger station.
.
The radio automatically changes to
stereo reception when a stereo broad-
cast is received.
Audio/Audio set
–
CONTINUED
–
5-27