Subaru WRX 2018, Owner'S Manual

Page: 63 / 572

Remove the covers and locate the lower
anchorages (bars).
3. Remove the rear seat head restraint.
For details, refer to
“
Head restraint adjust-
ment
” F
1-8.
CAUTION
Store the head restraint that has
been removed in the trunk. Avoid
placing the head restraint in the
passenger compartment to prevent
it from being thrown around in the
passenger compartment in a sud-
den stop or a sharp turn.
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at
“ ”
marks on
the bottom of the rear seatback. When the
hooks are connected, make sure the
adjacent seatbelts are not caught.
5. [If your child restraint system is of a
flexible attachment type (which uses
tether belts to connect the child restraint
system properly to the lower anchorages)]
While pushing the child restraint into the
seat cushion, pull both left and right lower
tether belts up to secure the child restraint
system firmly by taking up the slack in the
belt.
6. Latch the top tether hook onto the
tether anchorage that is located on the
rear shelf and tighten the top tether firmly.
For additional instructions, refer to
“
Top
tether anchorages
” F
1-32.
Seat, seatbelt and SRS airbags/Child restraint systems
–
CONTINUED
–
1-31