Subaru WRX 2018, Owner'S Manual

Page: 216 / 572

Instruments and controls/Mirrors
programmed HomeLink buttons
be erased for security purposes.
Refer to
“
Erasing HomeLink But-
tons
” F
3-80.
!
Programming a New HomeLink
Button
1) Indicator Light
2) HomeLink Buttons
1. Press and release the HomeLink
button that you would like to program.
The HomeLink indicator light will flash
orange slowly (if not, refer to
“
Erasing
HomeLink Buttons
” F
3-80).
1) Garage door opener remote
2. Position the hand-held remote (garage
door opener remote) 1 to 3 inches (2 to 8
cm) away from the HomeLink button that
you would like to program.
NOTE
Some hand-held remotes (garage door
opener remotes) may actually train
better at a distance of 6 to 12 inches
(15 to 20 cm). Keep this in mind if you
have difficulty with the programming
process.
3. While the HomeLink indicator light is
flashing orange, press and hold the hand-
held remote button. Continue pressing the
hand-held remote button until the
HomeLink indicator light changes from
orange to green. You may now release
the hand-held remote button.
NOTE
Some devices may require you to
replace this
“
Programming a New
HomeLink Button
”
step 3 with proce-
dures noted in the
“
Gate Operator /
Canadian Programming
”
section. Refer
to
“
Gate Operator / Canadian Program-
ming
” F
3-80.
3-78