STULZ CyberRow DX Series Installation, Operation & Maintenance Manual
Control
Menu
4.5.4 Control Menu Loop
From the Control Menu you may select from 4 screen menus: Setpoints,
Alarm Setpoints, Clock and Version. The controller may be programmed
by the user to require level 1 password authorization to enter this menu
loop (see Section 4.2.6). Once password access is granted, you may
select and adjust the setpoints controlling the performance of the unit,
enable alarms and determine their setpoints and set the clock.
Press ( ) Key
Press ( ) Key
Press ( ) or ( ) Key
Press ( ) or ( ) Key
Press ( ) or ( ) Key
MAIN MENU
Alarm Log
CONTROL
Service
CONTROL
Version
SET
Alarm Set
CONTROL
Set
ALARM SET
Clock
CONTROL
Alarm Set
CLOCK
Version
CONTROL
Clock
VERSION
Set
The Setpoints (
SET
) screens allow you to view and adjust the
temperature and humidity setpoint control parameters and
compare them to system level operating data derived from the
various Sensor/Transmitter inputs. See Section 4.5.4.1.
The Alarm Setpoints
(
ALARM SET
)
screens allow you to enable
and adjust the high and low temperature and humidity alarm
setpoints and offsets and compare them to the control setpoints
and to the system level operating data derived from the Sensor/
Transmitter inputs. See Section 4.5.4.2.
Two Version screens are provided for information only. They show
controller hardware and software details that are useful to STULZ
Product Support if technical assistance is needed.
From the Clock screens you may view and adjust the current
time, date and day and set up operating schedule(s) and
setpoints for the A/C system. See Section 4.5.4.3.
Information
Carel S.p.A.
Code:
Ver.:1.2
10/15/12
Manual code:
Bios: 5.18
28/11/11
Boot: 4.03
03/07/06
Information
pCO type: pCO3 Large
Total Flash:
2048KB
Ram:
512KB
Built-In type:
None
Main cycle:
3.4 cycles/s
285ms
Press (
)
Key
Press (
)
Key
4-20
Press
( )
Key
Summary of Contents for CyberRow DX CRS-042-G
Page 94: ......
