CyberAiR DX Floor Mounted IOM Manual
SECURE WATER DETECTOR CABLE
TO FLOOR WITH J-CLIP, WIRE TIE
w/ ADHESIVE MOUNT, OR MASTIC ADHESIVE.
OPTIONAL CABLE TYPE
WATER DETECTOR
OPTIONAL
FLOOR STAND
If a floor stand is selected (for downflow units), see Section 2.6.1 and refer to the installation drawing provided.
Cut out an opening in the raised floor slightly larger than the cabinet’s overall base dimension so the weight of
the A/C unit is supported by the stand.
Figure 9- Typical CFD (Downflow) Installation
NOTE
: These units use welded frame construction for unit rigidity. The system is designed to be installed on a
roof curb, which is provided by others and ducted into a singular space to be conditioned. Ensure the curb is
sealed to prevent air leakage. See the detail drawing provided with the unit for interface dimensions. These
units are designed to be ducted to a space to be conditioned and are intended to condition only one room.
2-3
