Struers Exotom 100, Instruction Manual

Page: 40 / 247

Exotom-100
Instruction Manual
34
2. Accessories
Specification Code
AxioCut Kit for Exotom-100
Increases cutting capacity (depth) by 150 mm. Requires
installation by Struers Service Technician. Gross weight 9 kg
EXOMA
Replacement Stainless Steel Bands
For Cutting Table with 12 mm T-slots. Available in three
sizes, each supplied in sets of two:
100 x 225 mm
100 x 300 mm
60 x 548 mm
EXOBS
EXOBM
EXOBL
Quick-clamping Device for 12 mm T-slots, Left
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table and placed to the left of the cut-
off wheel.
EXOLE
Quick-clamping Device for 12 mm T-slots, Right
For securing the workpiece. Complete with back stop. To be
mounted on a cutting table and placed to the right of the cut-
off wheel.
EXORI
Clamping Tools for 12 mm T-slots
For clamping irregularly shaped workpieces. Complete with
clamps, supports and bolts.
MAGOF
Vertical Clamping System for 12 mm T-slots
For clamping irregularly shaped workpieces. Complete with
operating key and one flat clamping shoe.
EXOVS
Chain Spanner for 12 mm T-slots
For clamping cylindrical or irregularly shaped workpieces.
Complete with anchor block and operating key.
EXOCS
Swivel Shoes for Vertical Clamping System
For clamping irregularly shaped workpieces. Set of four
multi-shaped swivel shoes.
TREVI
Riser Block for 12 mm Vertical Clamping System
For elevating Vertical Clamping System when clamping high
workpieces
EXOKS
Arm Extension for 12 mm Vertical Clamping System
For extending arm of Vertical Clamping System
EXOAR
Spare Nylon Filter for Recirculation Cooling System
For insertion into filter-drawer in cooling unit compartment.
EXOFI