Struers Exotom 100, Instruction Manual

Page: 10 / 247

Exotom-100
Instruction Manual
4
Unpack the Control Panel and mount on right side of unit using the
two 5 mm screws and Allen key supplied (use holes and as
indicated on drawing).
Mount the earth wire below the mounting plate using the
third 5 mm screw .
Press cover towards cabinet wall until it snaps onto the mounting
plate.
Connect Control Panel plug to socket .
The position of the Control Panel is controlled by a friction
mounting. After mounting the control panel it is possible to
adjust the mobility of the Control Panel this way:
Adjust the main joint with the nut using the combined
12/17 mm spanner supplied.
The joint just behind the Control Panel may be adjusted too,
using the same spanner.
Mounting the Control Panel