Struers Exotom 100, Instruction Manual

Page: 28 / 247

Exotom-100
Instruction Manual
22
The contrast settings of the display can be adjusted to suit
individual preferences (default value: 22, adjustment interval:
0-50).
The language can be set to English (default), German, French,
Spanish or Japanese.
After cutting or after pressing STOP
o
, the return movement of
the cut-off wheel can be set to three different functions:
Top: Exotom-100 automatically retracts the cut-off wheel to
the top position.
Start: Exotom-100 automatically retracts the cut-off wheel to
the original position of the cut-off wheel, at the time you
pressed START
s
(default).
Stay: The cut-off wheel stays down.
The Feed, Force and Stop values in the display panel can be set to
displayed in either mm/Newton (default) or inches/pounds force.
It is possible to select three different operation modes:
Configuration: Full functionality
Development: No access to parameters in CONFIGURATION
menu, except Display contrast
Production: Access to START, STOP, Fixed Stop and
movement of cut-off wheel,
and to Display contrast in the
CONFIGURATION menu
To select your own pass code, go to the CONFIGURATION menu.
Select Operation mode to get access to CHANGE OPERATION
MODE menu.
Display contrast
Language
Return position
Important
Use the Stay function for bakelite bonded diamond or CBN cut-off wheels,
as retraction might destroy the rim of the cut-off wheel.
Units
Operation mode