60
Removing the Top Casing
Step 1:
Undo the 4 screws shown in the picture on the right.
This will allow the top panel A to be removed.
Step 2:
Undo the 6 screws as shown in the picture on the left.
This will both the upper front panel B and the lower front panel
C to be removed.
To Open & Close Burner Door
Once the top casing has been removed as detailed above, the burner door can be opened and closed by
completing the following steps:
To Open the Door:
Disconnect the gas pipe from the gas valve: see chapter
6.2 - Gas Connection.
Undo and remove the four nuts & washers. These are
located in each corner of the square burner door.
Once removed, the burner door can then be lifted from front
to back.
Once opened, using the support arms to hold the burner door
open and lock it into place by inserting a locking pin as shown
in the picture on the right
– location A.
To Close the Door:
Complete the above procedure in reverse order.
Tighten down the nuts as shown.
Fit gas pipework back to gas valve.
Complete tightness test.
g
Summary of Contents for S-FX 125
