Strebel S-FX 125, Installation Operating & Maintenance Manual

Page: 39 / 68

39
10.3.1 H
EATING
P
ARAMETER
Adjustment Temperature
This parameter can be accessed
by “USER MENU” > “HEATING” >
AJUSTMENT TEMPERATURE.”
Using the contextual buttons 1 and 2, the maximum CH setpoint and
the minimum setpoint can be set.
Once both settings have been set, press OK to confirm.
Reduction Adjustment Temperature
This parameter can be accessed by “USER MENU” > “HEATING” >
“REDUCTION ADJUSTMENT TEMPERATURE.”
Using the contextual buttons 1 and 2, the reduction adjustment
temperature can be changed. This ranges from 0c to 50c.
Once the setting has been set, press OK to confirm.
Sliding Temperature
This parameter is active once an outside temperature sensor has been installed to the S-FX boiler. With this
sensor installed the flow temperature of the heating system is adjusted according to the outside temperature.
This ensures a high level of comfort and energy saving throughout the year.
Standard Compensation Curve:
Outside Temperature Graph is as per below