Strebel S-FX 125, Installation Operating & Maintenance Manual

Page: 57 / 68

57
14.6 Start Up Checklist
Installation/start-up checklist
Exhaust Flue Installation Information
Diameter
Total length
Length horizontal
Length vertical
Length sloped at …..°
Number elbows 90°
Number elbows 60°
Number elbows 45°
Number elbows 30°
Distance vertical from roof
Distance from (closest) wall
Possibility of dust/chemicals drawn into air intake?
If YES => of which kind?
Distance from Flue outlet (top of chimney) vertical
Distance from Flue outlet (top of chimney) horizontal
Is there a condensate drain installed to common flue system
Flue outlet pressure (on bottom of boiler)
Condensate Drain
Check the level of the heat exchanger; It must have a slight angle from the rear to ensure
that the condensate drains from the heat exchanger.
(YES/NO)
Condensate trap (from package) installed according installation manual? (YES/NO)
Inside diameter of drain piping mm/inch
Is there a definite air gap between the condensate trap and the connection to drain pipe? (YES/NO)
Total drop in height from boiler to drain piping exit point
Any additional trap points? (YES/NO)
Perform PH test and register PH value
Condensate Neutralizer installed (YES/NO)
Installer Information
Company
Engineer name
Address
Postal code
City
County
Telephone
number
Site Information
Site name
Site contact
(End user)
Address
Postal code
City
County
Telephone
number
Boiler information
Model
Serial number
Installation date
Cascade installation (Y/N) (YES/NO)
Number of boilers
Type of boilers in cascade
After filling in form please send a copy by e-mail to:
salesoffice@strebel.co.uk.