Eden260V User Guide
5 Using Objet Studio
DOC-32020 Rev. F
5-27
Measurement Units
3D files contain an object's proportions, but not its units of measure. Therefore,
make sure to correctly select either millimeters or inches when inserting an
object. Otherwise, the size of the object on the build tray will be either much too
large or much too small.
To set the measurement units when inserting an object:
➢
In the
Insert
dialog box,
Units
field, select
Millimeter
or
Inch
:
Figure 5-22
Units
field in the
Insert
dialog box
To change measurement units for a selected object from the
Model Settings
ribbon:
1. Open the
Units
flyout toolbar.
Figure 5-23
Units
flyout toolbar
2. Select the measurement units desired.
