Eden260V User Guide
6 Operating and Maintaining the Printer
DOC-32020 Rev. F
6-65
10.Before continuing, inspect the spring-loaded pins. If there are burn marks
around the pins or if the pins are loose—their springs are not functioning
properly—and do not support the bulb, continue with step
, to replace the
UV reflector.
Otherwise, continue with step 8 to replace the UV bulb.
Figure 6-100 Spring-loaded pin
11.Using the polyurethane tube provided in the kit, push the new UV lamp bulb
into the UV reflector. Make sure that the tip on the bulb is facing the slot.
Figure 6-101 Pushing the new UV bulb into the UV reflector
