Eden260V User Guide
5 Using Objet Studio
DOC-32020 Rev. F
5-47
Choosing the Support Strength
When producing models, support material fills some hollow and empty sections
(see "Manual Positioning" on page 5-22). Objet Studio allows you to adjust the
strength of the structure formed with the support material. This adjustment is
useful when producing either large/massive models or small/delicate models. For
most purposes, the default setting provides adequate support strength.
To change the strength of the support structure used when printing a
model:
1. Select a model on the tray.
2. On the
Model Settings
ribbon, in the
Options
group, click
.
or—
❒
On the
, click
.
or—
❒
From the right-click context menu, select
Advanced Properties
.
The
Advanced Properties
dialog box opens.
Figure 5-55
Advanced Properties
dialog box
Note:
If an object is split into shells, the
Advanced Properties
enabled vary with
the object selection. If a single element is selected only
Hollow
is enabled. If a
group of elements is selected only
Grid Style
is enabled.
3. In the
Grid Style
section, choose the support strength suitable for the selected
model. You can select a different support strength for each model on the tray.
❒
Standard
—for models needing average support (most models).
❒
Heavy
—for large models needing much support.
4. Click
Apply
.
