50
866-795-1586 • WWW.STONEAGETOOLS.COM
9. The image below shows how the Prodrain should look once the HP Hose and Snout have been properly installed.
(Figure 7)
10. Lay the assembly down to attach the waterblast tool to the Male Hose End. Coat the threads of the hose end with Blue Goop by
SWAGELOK
®
or and equivalent Anti-seize.
(Figure 8)
11. Remove the Quick Release Pin and insert the FF 121-XX into the collet block.
(Figure 9)
12. Rotate the Clamp Tension Lever clockwise on the ABX-PRO Tractor to tighten the cam in place.
(Figure 10)
FIGURE 7
FIGURE 9
FIGURE 8
FIGURE 10
“ENGAGE”
CAM TENSION
LEVER
WATERBLAST
TOOL
MALE HOSE
END
COLLET
QUICK RELEASE
PIN
PRO-700-V2 PRODRAIN SET-UP