24
866-795-1586 • WWW.STONEAGETOOLS.COM
ROLLER REMOVAL
1. Open the back cover of the ABX-PRO Tractor by pulling the top two Quick Release Pins in the outward direction.
(Figure 1)
2. Push the Adjustable Handle in the counterclockwise direction to loosen the CAM Lever and bushing. Push the Eccentric Lever in the
counterclockwise direction, moving the indicator pin to
“Disengaged”
.
(Figure 2)
3. Loosening the Cam Lever opens up the space between the Spline Roller Assemblies.
(Figure 3)
4. Remove the two socket head cap screws, Roller Washers, Hub Outer Plates and Rollers.
(Figure 4)
FIGURE 1
ROLLER REMOVAL INSTRUCTIONS
FIGURE 2
FIGURE 3
CAM
LEVER
QUICK
RELEASE
PIN (X 2)
ADJUSTABLE
HANDLE
INDICATOR
PIN
IDLER ROLLER
ASSEMBLY
DRIVE ROLLER
ASSEMBLY
FIGURE 4
ROLLER (X 2)
IDLER HUB
DRIVE HUB
HUB OUTER
PLATE (X 2)
ROLLER
WASHER
(X 2)
5/16”
SH-CS
(X 2)
WARNING
Always de-energize the system before servicing or replacing any parts. Failure to do so can result in severe injury and/or death.
Keep hands, hair, and clothing clear of rotating parts.
NOTICE
This process will be typical for Poly Roller replacements on the ABX-PRO Tractor Assembly. Installation of the appropriate Roller should be
completed prior to installing the hose and tool into the AUTOBOX
®
ABX-PRO-100 Assembly.