23
866-795-1586 • WWW.STONEAGETOOLS.COM
ROLLER AND COLLET SELECTION
SELECTING THE APPROPRIATE COLLET AND ROLLERS
The AUTOBOX
®
ABX-PRO-100 comes with one pair of the PRO 174-46 installed in the AUTOBOX
®
ABX-PRO
TRACTOR. It also comes with a pair of the PRO 174-34 and PRO 174-58 rollers in the package. The PRO 174-89 rollers are available
for 3/8” hoses but not included. The sizing chart below is also located on a plaque near the air motor on the
AUTOBOX
®
ABX-PRO
TRACTOR.
POLY ROLLERS
ABX-PRO
HOSE OD
SPIRSTAR
PARKER
COLLET SIZE
STONEAGE
PART NUMBER
PRO 174-34
Ø 0.34 IN.
0.26–0.38 IN.
3/2
2240D-02
0.297 in. / 7.5 mm
FF 121-297
3/4, 4/2
2240D-025, 2440D-02
0.328 in. / 8.0 mm
FF 121-328
3/6, 5/2
2240D-03
0.406 in. / 10.0 mm
FF 121-406
PRO 174-46
Ø 0.46 IN.
0.39–0.50 IN.
4/4
2448D-025
0.438 in. / 11.0 mm
FF 121-438
4/6, 5/4, 6/2
2240D-04
0.460 in. / 11.7 mm
FF 121-460
2640D-025, 2740D-03
0.484 in. / 12.3 mm
FF 121-484
6/4
2440D-04
0.516 in. / 13.0 mm
FF 121-516
PRO 174-58
Ø 0.58 IN.
0.51–0.61 IN.
5/6, 8/2
2240D-05, 2740D-03
0.547in. / 14.0 mm
FF 121-547
8/4
0.594 in. / 15.0 mm
FF 121-594
2440D-05
0.625 in. / 16.0 mm
FF 121-625
PRO 174-89
Ø 0.89 IN.
0.80–0.93 IN.
3/8” RUBBER WB HOSE
N/A
N/A
N/A
FIGURE 1
COLLET
QUICK
RELEASE
PIN
MALE
HOSE
END
MALE
HOSE END
HIGH
PRESSURE
HOSE
SECTION VIEW
BOP 030 COLLET
BLOCK ASSEMBLY
FF-121-XX
COLLET
BOP 081-6
SNOUT TUBE
AUTOBOX
®
ABX-PRO
TRACTOR
FIGURE 1.1
COLLET AND HOSE INSTALLATION
1. Once the appropriate Collet size for the hose diameter is selected, pull the Quick Release Pin and remove the Collet. Feed the Male
Hose End through the AUTOBOX
®
ABX-PRO TRACTOR, BOP 030 Collet Block, and BOP 081-6 Snout Tube.
(Figure 1)
Replace the Collet and Quick Release Pin. Pull back on the hose to ensure the Male Hose End does not back out past the Collet.
(Figure 1.1)