16
866-795-1586 • WWW.STONEAGETOOLS.COM
HOSE AND COLLET INSTALLATION
FEMALE POSITIONER ARM TO MALE POSITIONER ARM CONNECTION
FIGURE 1
FIGURE 1.1
FEMALE
POSITIONER
ARM
MALE
POSITIONER
ARM
QUICK
RELEASE PIN
QUICK
RELEASE PIN
STRAP MOUNT ASSEMBLY SET-UP
WARNING
Prior to use, always tighten and test the Backout Preventer to ensure the tool does not pass backward toward the Collet Block Assembly.
Failure to do so can result in severe injury and/or death.
1. Slide the Female Positioner Arm onto the Male Positioner Arm.
(Figure 1)
Line up the incremental holes and push the Quick Release
Pin through both positioner arms.
(Figure 1.1)