17
866-795-1586 • WWW.STONEAGETOOLS.COM
1. To load a hose, release the Adjustable Handle and rotate the Cam Lever until the Indicator Pin is in the
“Disengaged”
position. This
opens up the space between the rollers.
(Figure 1)
2. Pull out the Quick Release Pin and remove the Collet. Feed the male hose end into the guide tube, through the rollers and out the end
of the BOP 081-6 Snout Tube.
(Figure 2)
Go to page 23, “Roller and Collet Selection” to determine the appropriate size Rollers
and Collets for the high pressure hose diameter.
CAM LEVER
ADJUSTABLE
HANDLE
INDICATOR
PIN
“DISENGAGED”
FIGURE 1
HOSE AND COLLET INSTALLATION
LOADING THE HIGH-PRESSURE HOSE
NOTICE
Only high quality hoses intended for waterblast applications should be used as high-pressure hoses. Pressure rating of high-pressure hoses
MUST NEVER be exceeded. Do not use a shrouded hose or hose with a steel protective cover. This will cause severe damage to the Rollers.
FIGURE 2
COLLET
QUICK
RELEASE
PIN
MALE
HOSE
END
ROLLERS
GUIDE
TUBE