Stone Age WARTHOG WGR MAGNUM Series User Manual Download Page 30

Warranties set forth herein extend only to End-Users, 
meaning customers acquiring, or that have previously 

acquired, a product manufactured by StoneAge (“Product”) 

for their own use and not for resale, either directly from 
StoneAge Inc. (“StoneAge”) or from a StoneAge Authorized 
Dealer or Reseller (“Dealer”). No warranty of any kind or 
nature is made by StoneAge beyond those expressly stated 
herein. 

1. 

LIMITED WARRANTY PERIOD.

 Subject to the limitations 

and conditions hereinafter set forth, StoneAge warrants its 

Product to be free from defects in workmanship and material 
for a period of one (1) year from the date of purchase by 
the End-User, provided that the end of the limited warranty 
period shall not be later than eighteen (18) months from the 

date of shipment of the Product to the Dealer or the End-User 

by StoneAge (“Limited Warranty Period”). All replacement 
parts which are furnished under this Limited Warranty and 
properly installed shall be warranted to the same extent 

as the original Product under this Limited Warranty if, and 
only if, the original parts were found to be defective within 

the original Limited Warranty Period covering the original 
Product. Replacement parts are warranted for the remainder 

of the original Limited Warranty Period. This Limited 

Warranty does not cover any component part of any Product 
not manufactured by StoneAge. Any such component part 
is subject exclusively to the component manufacturer’s 
warranty terms and conditions.

2. 

LIMITED WARRANTY COVERAGE. 

StoneAge’s 

sole obligation under this Limited Warranty shall be, at 

StoneAge’s option and upon StoneAge’s inspection, to 
repair, replace or issue a credit for any Product which 
is determined by StoneAge to be defective in material or 
workmanship. StoneAge reserves the right to examine the 

alleged defective Product to determine whether this Limited 

Warranty is applicable, and final determination of limited 
warranty coverage lies solely with StoneAge.  No statement 

or recommendation made by a StoneAge representative, 

Dealer or agent to End-User shall constitute a warranty by 
StoneAge or a waiver or modification to any of the provisions 
hereof or create any liability for StoneAge.  

3. 

WARRANTY SERVICE PROVIDERS.

 Service and 

repair of the Product is to be performed only by StoneAge 
authorized service representatives, including Dealers who 
are authorized repair centers, with StoneAge approved 
parts. Information about StoneAge authorized service 
representatives can be obtained through the StoneAge 
website at www.stoneagetools.com/service. Unauthorized 
service, repair or modification of the Product or use of parts 
not approved by StoneAge will void this Limited Warranty. 
StoneAge reserves the right to change or improve the 
material and design of the Product at any time without notice 

to End-User, and StoneAge is not obligated to make the 

same improvements during warranty service to any Product 
previously manufactured.

4. 

WARRANTY EXCLUSIONS.

 This Limited Warranty does 

not cover, and StoneAge shall not be responsible for the 
following, or damage caused by the following: (1) any Product 
that has been altered or modified in any way not approved 
by StoneAge in advance in writing; (2) any Product that has 
been operated under more severe conditions or beyond the 
rated capacity specified for that Product; (3) depreciation 

or damage caused by normal wear and tear, failure to follow 
operation or installation instructions, misuse, negligence 
or lack of proper protection during storage; (4) exposure 

to fire, moisture, water intrusion, electrical stress, insects, 

explosions, extraordinary weather and/or environmental 
conditions including, but not limited to lightning, natural 
disasters, storms, windstorms, hail, earthquakes, acts of 
God or any other force majeure event; (5) damage to any 

Product caused by any attempt to repair, replace, or service 
the Product by persons other than StoneAge authorized 

service representatives; (6) costs of normal maintenance 
parts and services; (7) damage sustained during unloading, 
shipment or transit of the Product; or (8) failure to perform 

the recommended periodic maintenance procedures listed in 
the Operator’s Manual accompanying the Product.  

5. 

REQUIRED WARRANTY PROCEDURES.

 To be eligible for 

warranty service, the End-User must: (1) report the Product 
defect to the entity where the Product was purchased (i.e. 
StoneAge or the Dealer) within the Limited Warranty Period 
specified in this Limited Warranty; (2) submit the original 
invoice to establish ownership and date of purchase; and (3) 
make the Product available to a StoneAge authorized service 
representative for inspection to determine eligibility for 
coverage under this Limited Warranty. This Limited Warranty 
shall not extend to any person or entity who fails to provide 
proof of original purchase from StoneAge or a Dealer. No 
Product may be returned for credit or adjustment without 
prior written permission from StoneAge.  

6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER 
REMEDIES.  EXCEPT AS EXPRESSLY STATED HEREIN 
(AND TO THE FULLEST EXTENT ALLOWED UNDER 

APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WITHOUT LIMITATION ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE, AND ANY AND ALL WARRANTIES, 
REPRESENTATIONS OR PROMISES AS TO THE QUALITY, 
PERFORMANCE OR FREEDOM FROM DEFECT OF THE 
PRODUCT COVERED BY THIS LIMITED WARRANTY. 
STONEAGE FURTHER DISCLAIMS ALL IMPLIED 
INDEMNITIES.

WARRANTY:

 

TERMS AND CONDITIONS AND WARRANTY INFORMATION

30

866-795-1586 • WWW.SEWERNOZZLES.COM

Summary of Contents for WARTHOG WGR MAGNUM Series

































Reviews: