Stone Age WARTHOG WGR MAGNUM Series User Manual Download Page 3

StoneAge Inc.
466 S. Skylane Drive
Durango, CO 81303, USA
Phone: 970-259-2869
Toll Free: 866-795-1586
www.stoneagetools.com

StoneAge NL
Reedijk 7Q
3274 KE Heinenoord
Netherlands
(+31) (0) 85 902 73 70
[email protected]

This manual must be used in accordance with all applicable national laws. The manual shall be 
regarded as a part of the machine and shall be kept for reference until the final dismantling of the 
machine, as defined by applicable national law(s).

Updated manuals can be downloaded at: 

https://www.warthog-nozzles.com/resources/

 

MANUFACTURER’S INFORMATION   

DESCRIPTION OF EQUIPMENT AND INTENDED USE 

The WGR Warthog Magnum is the first tool in the 
Warthog Magnum Series, a line of sewer nozzles 
specifically designed for extended tool life, increased 
maintenance intervals and optimal handling of dirty or 
recycled water.                                                                      

                                                  

KEY FEATURES: 
•  Optimized speed control extends mainte-

nance intervals 

•  Streamlined design prevents tool from 

catching inside of pipe. 

•  Replaceable fins made of hardened steel 

for longer life available in different sizes. 

•  Flush style head protects front shaft seals 

for extended fluid life. 

•  Easily convertible from pulling to desca-

ling 

•  Descaling ports now come standard. 
•  Latest seal technology effectively handles 

dirty or recycled water for improved 
performance 

•  Choose your rotation speed with 3 viscous 

fluid options. 

SPECIFICATIONS

 

Tool Family:

Warthog Magnum

Tool Model:

WGR-1

WGR-1-1/4

Units:

Imperial

Metric

Imperial

Metric

Pipe Size:

8-36 in.

203-914 mm

8-36 in. 

203-914 mm

Pressure Range:

1200-5000 psi

83-345 bar

1200-5000 psi

83-345 bar

Flow Range:

50-80 gpm

189-303 lpm

80-120 gpm

303-454 lpm

Outside Diameter:

4.5 in.   

114 mm

5.75 in.   

146 mm

Overall Length:

10.25 in. 

260 mm

10.25 in. 

260 mm

Weight:

13.25 lbs   

6 kg

13.55 lbs  

6.1 kg

Rotation Speed:

150-400rpm

150-300rpm

Inlet Connection:

1” NPT or BSPP

1 1/4” NPT or BSPP

Nozzle Ports:

 7 x 1/8” NPT

7 x 1/8” NPT

Flow Rating:

6 Cv

Pulling Force:

Reference 

http://jetting.stoneagetools.com/#/t/sw

 for values

3

866-795-1586 • WWW.SEWERNOZZLES.COM

Summary of Contents for WARTHOG WGR MAGNUM Series

































Reviews: