NECESSARY TOOLS:
• 3/8” Drive Ratchet with 3” Extension
• Arbor Press (recommended)
• Bearing Splitter
• Bench vise (recommended)
• Cotton swab
• Large Adjustable Wrench
(12” Crescent® Wrench)
• Medium size flat-head screw driver
• Pic
• Rubber Band
• Automotive Sliding Wrench
(18” Crescent® C718 Automotive Wrench)
• 5/32” Hex Key
Mobil® and Mobilux® are registered trademarks and/or trademarks of Exxon Mobil®.
Loctite® and Threadlocker Blue 242® are registered trademarks of Henkel AG & Co. KGaA.
Blue Goop® is a registered trademark of Swagelok® Company
MAINTENANCE TOOLS AND MATERIALS
WGR 180
Magnum Shaft Lock Pin
WGR 612
TOOL KIT (INCLUDES)
WGR 183
Hex Tool
WGR 181
Removal Press Tube
WGR 182
Installation Press
WGR 184
Seal Press
WGR 186
HP Seal Puller
SC 287 105
2½ Wrench
NECESSARY MATERIALS:
• Clean lint free rags or blue shop towels
• Anti-Seize - Swagelok® Blue Goop®
• StoneAge PN (GP 043)
• Grease - Mobil Mobilux® EP1
• StoneAge PN (GP 049)
• Loctite® Blue 242®
• Isopropyl Alcohol
• When installing jets, StoneAge uses
Parker® Yellow ThreadMate and Teflon
Tape or an equivalent combination on
the threads of each jet.
Product training and proper tools are required to service this nozzle. If you are uncomfortable
performing the service, bring the nozzle to your authorized dealer.
The use of a bench vise and an arbor press is recommended. Take care throughout the entire procedure
to keep the internals clean and free from grit, lint, and contamination. Failure to do so could result in
premature failure after service. See complete Disassembly and Assembly instructions in this manual.
For maintenance videos and more:
https://www.youtube.com/playlist?list=PL-XpY7HhmpxVkccu1zG45Wh5w0Vy3MwZ0
11
866-795-1586 • WWW.SEWERNOZZLES.COM
