Still EK-X10, Original Instructions Manual, Page: 61 / 124

Operation
4
Operating devices
Switching on the control system
– Remove the cover of the battery compart-
ment and insert the battery plug (1)
For industrial trucks with an open platform:
– Step onto the platform
For industrial trucks with a cab:
– Climb into the cab and close the barriers,
ensuring that you only take hold of the
barriers at the designated gripping points
(2).
NOTE
Up to a cab lift height of 1.2 m, the cab barriers
may be left open when the truck is being
driven. If the truck is driven at a lift height
of greater than 1.2 m, the barriers must be
closed. On the version with a simplex mast
and auxiliary lift, the changeover point for all
of the affected functions is not at 1.2 m, but
instead at approximately 0.4 m.
DANGER
Danger of accidents
Never climb on jump on to the industrial truck while
it is moving. Never climb or jump off the industrial
truck while it is moving.
5212 804 3001 EN - 02/2017 55