Still EK-X10, Original Instructions Manual, Page: 115 / 124

Special equipment
7
Tilt barrier
Tilt barrier
Description
When the driver leans on the tilting order
picking barrier, it opens out to the side towards
the racking. This means that the distance to
the racking is reduced, which facilitates order
picking. If the operator is no longer leaning on
the tilting order picking barrier, the barrier is
automatically returned to the initial position by
spring force.
The tilt barrier consists essentially of a mobile
upper part, a fixed bottom part and a hinge
connecting the upper and bottom parts. For
safety reasons, the tilt barrier is unlocked only
under certain conditions.
Function
The barrier can only be opened if:
• The barriers are closed
• The sensors for the second hand are not
actuated
• The operating levers for driving/hydraulics
are in the neutral position
• The foot switch is not actuated
• The driving speed v is < 0.1 km/h
The barrier will be locked if:
• One of the barriers is opened
• The foot switch and the drive operating lever
is actuated
• The main lift function is selected
NOTE
If one of the two barriers is opened and then
closed again, the tilting order picking barrier is
locked. It is unlocked again if the foot switch
is briefly actuated once and the remaining
conditions are fulfilled for it to be unlocked.
5212 804 3001 EN - 02/2017 109