Still EK-X10, Original Instructions Manual, Page: 103 / 124

Special equipment
7
Inductive guidance (IZF)
– An acoustic signal sounds.
– Both symbols (6) flash.
– Continue. The truck is driven automatically
along the centre of the wire groove.
– When both antennas detect the induction
track, the wire search is finished and the
symbol (4) is continuously lit.
– The truck can now be driven at the permis-
sible speed within the racking.
NOTE
The more precisely the driver drives the middle
of the truck onto the wire groove, the faster the
guidance procedure will be completed.
Entering the aisle
– Drive the truck into the aisle in automatic
driving mode.
– When the sensor system of the truck has
detected the aisle, the maximum permissi-
ble speed within the aisle is possible.
Automatic driving within the aisle
If the steering knob is turned accidentally
to its straight-ahead position (middle stop)
during automatic drive mode, the truck is
automatically braked to a standstill.
Switching from automatic to manual operation
within the aisle
If the truck is accidentally switched to manual
steering within the aisle, it is immediately
braked to a standstill. It is then only possible
to continue at creep speed.
Driving speed adaptation
Through automatic speed adaptation, the
maximum possible driving speed is adjusted
between 2.5 and max. 9 km/h, according to
the situation. If an unsafe situation arises, for
example an error, the driving speed is limited
or driving is switched off completely.
5212 804 3001 EN - 02/2017 97