Still EK-X10, Original Instructions Manual, Page: 23 / 124

Safety
2
Residual risks when using order pickers
Please heed all provided safety warnings.
Residual risks when using order pickers
DANGER
Risk of accident
– During driving, the operator must make sure that
all body parts are located within the truck contour
at all times, particularly in trucks without barriers
and a cab rail.
– Order picking, i.e. reaching outside the truck
contour, is only permitted when the truck is
stationary.
– When driving past static building and racking
parts, make sure that you maintain a sufficient
distance and adjust your driving speed.
– In the event of oncoming traffic, always keep
a sufficient distance between yourself and the
approaching truck and adjust your driving speed.
– The operator must always be securely positio-
ned and have a secure footing on the platform,
especially when cornering.
Description of the situations
Depending on their design or the way in which
the commissioner trucks described here are
used, there may be a risk of severe injury to the
operator from static building or racking parts.
The risk exists in trucks:
• Without barriers and a cab rail
• Without rail guidance
• With feed-in rollers on one or both sides
• With a one-sided guide
In versions specified, the above-mentioned
risks may occur because second hand oper-
ation is not required for the truck type and the
modes of operation. In addition, trucks without
barriers or a cab rail may be driven with the
driver's compartment in the raised position
(floor of driver's cab <1.2 m). In trucks with
barriers and a cab rail, the barriers may be left
open when driving with the driver's compart-
ment in the raised position (floor of driver's cab
<1.2 m). If the driver's compartment needs to
be raised higher than 1.2 m, the barriers must
be closed.
Application area
The floor in the application area must have
sufficient strength to bear the weight of
the truck. The wheel loads / floor loads
specific to your truck will be made available
by your responsible sales representative.
The condition of the floor surface affects the
braking distance of the truck. The operator
must take this into consideration when driving
and braking.
The trucks described here are designed to be
used in areas (according to VDI2695, category
1)
5212 804 3001 EN - 02/2017 17